High performing, non-hardening acoustical sealant designed to optimize the performance of STC rated assemblies
Apply QuietSeal® Pro around perimeters of the walls to prevent noise leaks in the wall assembly
Stays soft for lasting, high acoustic performance
Environmentally friendly: water-based, low VOC and low odor
Provides a draft and cold smoke seal in addition to noise seal
Easy application and hassle free clean up
QuietSeal Pro is a high performing, non-hardening acoustical sealant used to maintain optimum acoustic performance of wall assemblies. Apply QuietSeal® Pro around perimeters of the walls to prevent noise leaks in your assembly. The sealant will remain soft to prevent cracking and maintain lasting, high acoustic performance. The sealant is easy to use and offers a hassle free clean up – just use soap and water. Choose QuietSeal® Pro for quick application, maximum performance, and reliable results. For optimal acoustic performance, use the complete Quiet® Sound Damping System including QuietSeal Pro, QuietRock sound reducing drywall and QuietPutty acoustical putty.
| Unit Size | Application Thickness | Coverage | Weight |
|---|---|---|---|
| 28oz tube | 1/8’’ to 3/8’’ bead | 88 linear feet at 1/4’’ bead | 3 lbs/tube |
| Installation | QuietRock® EZ-SNAP Installation Instructions (ES & ES MR) GA-214 - Levels of Finish for Gypsum Panel Products ASTM C840 Standard Specification for Application and Finishing of Gypsum Board |
|---|---|
| Standard Specification for Latex Sealants | ASTM C834 Grade -18°C |
| Extrudability | ASTM C1183 Method B ≥2.1 g/s Extrusion Rate |
| Volume Shrinkage | ASTM C1241 Type OP ≤30% volume shrinkage |
| Low Temperature Flexibility | ASTM C734 Grade -18°C, no adhesion loss or cracking through to substrate after 500 hours |
| Recovery and Adhesion Loss | ASTM C736 ≥75% recovery and ≤25% total bond area loss |
| Slump | ASTM D2202 No slump observed |
| Stain Index | ASTM D2203 Maximum allowable stain index of 1 |
| Surface Burn | ASTM E84 Meets NFPA Class A Fire-Rating |
| Storage Temp | 40° F - 100° F (Do Not Freeze) |
| VOC Emissions Test | ASTM D2369 <0.1g/L VOC |
3-Part Specification for QuietPutty® Acoustical Putty and QuietSeal® Pro Acoustical Sealant.
Datasheet describing benefits and specs for QuietSeal Pro acoustical sealant.
Safety Data Sheet for QuietSeal Pro Acoustical Sealant.
Installation information for QuietRock 510, 530 & 545 along with QuietPutty® and QuietSeal® Pro.
Installation information for QuietRock EZ-SNAP® panels: QuietRock ES and ES Mold Resistant, along with QuietPutty® and QuietSeal® Pro.
